Study on the components changes of polysaccharides and saponins during nine steaming and drying of Polygonatum sibiricum.

BACKGROUND: In this study, the content and structure of Polygonatum sibiricum polysaccharides and saponins during different processing stages were determined. RESULTS: After processing of Polygonatum, the content of polysaccharide and glucose decreased, and the content of galactose, glucuronic acid and sugar substitution gradually increased. The content of total saponins increased significantly. Only 18 compounds were found in raw Polygonatum and 17 new compounds were presented in processed Polygonatum. During the processing of Polygonatum, the polysaccharide was partially degraded into oligosaccharides, the molecular weight gradually decreased, and the neutral sugar was converted into uronic acid, resulting in a decrease in polysaccharide content. The saponins were partially degraded into sapogenins or modified. CONCLUSION: This study clarifies the changes in the content and structure of polysaccharides and saponins in processed Polygonatum, which will pave the way for elucidating the processing mechanism. © 2024 Society of Chemical Industry.

Photodynamic anticancer activity evaluation of novel 5-aminolevulinic acid and 3-hydroxypyridinone conjugates.

5-Aminolevulinic acid (ALA) and its derivatives, serving as the endogenous precursor of the photosensitizer (PS) protoporphyrin IX (PpIX), successfully applied in tumor imaging and photodynamic therapy (PDT). ALA and its derivatives have been used to treat actinic keratosis (AK), basal cell carcinoma (BCC), and improve the detection of superficial bladder cancer. However, the high hydrophilicity of ALA and the conversion of PpIX to heme have limited the accumulation of PpIX, hindering the efficiency and potential application of ALA-PDT. This study aims to evaluate the PDT activity of three rationally designed series of ALA-HPO prodrugs, which were based on enhancing the lipophilicity of the prodrugs and reducing the labile iron pool (LIP) through HPO iron chelators to promote PpIX accumulation. Twenty-four ALA-HPO conjugates, incorporating amide, amino acid, and ester linkages, were synthesized. Most of the conjugates, exhibited no dark-toxicity to cells, according to bioactivity evaluation. Ester conjugates 19a-g showed promoted phototoxicity when tested on tumor cell lines, and this increased phototoxicity was strongly correlated with elevated PpIX levels. Among them, conjugate 19c emerged as the most promising (HeLa, IC50 = 24.25 ± 1.43 µM; MCF-7, IC50 = 43.30 ± 1.76 µM; A375, IC50 = 28.03 ± 1.00 µM), displaying superior photodynamic anticancer activity to ALA (IC50 > 100 µM). At a concentration of 80 µM, the fluorescence intensity of PpIX induced by compound 19c in HeLa, MCF-7, and A375 cells was 18.9, 5.3, and 2.8 times higher, respectively, than that induced by ALA. In conclusion, cellular phototoxicity showed a strong correlation with intracellular PpIX fluorescence levels, indicating the potential application of ALA-HPO conjugates in ALA-PDT.

NMR Study of Water-Soluble Carotenoid Crocin: Formation of Mixed Micelles, Interaction with Lipid Membrane and Antioxidant Activity.

Crocin is a unique water-soluble carotenoid found in crocus and gardenia flowers. Crocin has been shown to have a variety of pharmacological activities, such as antioxidant, anti-cancer, memory improvement, antidepressant, anti-ischemia, blood pressure lowering and aphrodisiac, gene protection and detoxification activities. Due to their amphiphilicity, crocin molecules form concentration-dependent self-associates (micelles) in a water solution. In the present study, using various NMR techniques (T2 relaxation and selective gradient NOESY), we have demonstrated that crocin forms mixed micelles with water-soluble drug delivery system glycyrrhizin and linoleic acid molecules. Note, that the spin-spin T2 relaxation time and NOESY spectroscopy are very sensitive to intermolecular interactions and molecular diffusion mobility. The second purpose of this work was the elucidation of the interaction of crocin with a model lipid membrane using NMR techniques and a molecular dynamics simulation and its effects on lipid oxidation. It was shown that the crocin molecule is located near the surface of the lipid bilayer and effectively protects lipids from oxidation by peroxyl radicals. The role of glycyrrhizin and vitamin C in metal-induced lipid oxidation was also elucidated. The results of this study may be useful for expanding the field of application of crocin in medicine and in the food industry.

Review of studies on polysaccharides, lignins and small molecular compounds from three Polygonatum Mill. (Asparagaceae) spp. in crude and processed states.

Since ancient times, Polygonatum Mill. (Asparagaceae) has been utilized as a medicinal and culinary resource in China. Its efficacy in treating various illnesses has been well documented. Traditional processing involves the Nine-Steam-Nine-Bask method, which results in a reduction of toxicity and enhanced effectiveness of Polygonatum. Many substances, such as polysaccharides, lignins, saponins, homoisoflavones, alkaloids, and others, have been successfully isolated from Polygonatum. This review presents the research progress on the chemical composition of three crude and processed Polygonatum, including Polygonatum sibiricum Redouté (P. sibiricum), Polygonatum kingianum Collett & Hemsl (P. kingianum), and Polygonatum cyrtonema Hua (P. cyrtonema). The review also includes the pharmacology of Polygonatum, specifically on the pharmacology of polysaccharides both before and after processing. Its objective is to provide a foundation for uncovering the significance of the processing procedure, and to facilitate the development and utilization of Polygonatum in clinical practice.

Mechanochemical C-H Arylation and Alkylation of Indoles Using 3 d Transition Metal and Zero-Valent Magnesium.

Although the 3 d transition-metal catalyzed C-H functionalization have been extensively employed to promote the formation of valuable carbon-carbon bonds, the persistent problems, including the use of sensitive Grignard reagents and the rigorous operations (solvent-drying, inert gas protection, metal pre-activation and RMgX addition rate control), still leave great room for further development of sustainable methodologies. Herein, we report a mechanochemical technology toward in-situ preparation of highly sensitive organomagnesium reagents, and thus building two general 3 d transition-metal catalytic platforms that enables regioselective arylation and alkylation of indoles with a wide variety of halides (including those containing post transformable functionalities and heteroaromatic rings). This mechanochemical strategy also brings unique reactivity and high step-economy in producing functionalized N-free indole products.

A high activity mesoporous Pt@KIT-6 nanocomposite for selective hydrogenation of halogenated nitroarenes in a continuous-flow microreactor.

In this study, we designed a Pt@KIT-6 nanocomposite prepared by impregnating platinum nanoparticles on the nanopores of the KIT-6 mesoporous material. This Pt@KIT-6 nanocomposite was used as a catalyst in a micro fixed bed reactor (MFBR) for the continuous-flow hydrogenation of halogenated nitroarenes, which demonstrates three advantages. First, the Pt@KIT-6 nanocomposite has a stable mesoporous nanostructure, which effectively enhances the active site and hydrogen adsorption capacity. The uniformly distributed pore structure and large specific surface area were confirmed by electron microscopy and N2 physisorption, respectively. In addition, the aggregation of the loaded metal was avoided, which facilitated the maintenance of high activity and selectivity. The conversion and selectivity reached 99% within 5.0 minutes at room temperature (20 °C). Furthermore, the continuous-flow microreactor allows precise control and timely transfer of the reaction system, reducing the impact of haloid acids. The activity and selectivity of the Pt@KIT-6 nanocomposite showed virtually no degradation after 24 hours of continuous operation of the entire continuous-flow system. Overall, the Pt@KIT-6 nanocomposite showed good catalysis for the hydrogenation of halogenated nitroarenes in the continuous-flow microreactor. This work provides insights into the rational design of a highly active and selective catalyst for selective hydrogenation systems.

Mechanochemical synthesis of cysteine-gum acacia intermolecular complex for multiple metal(loid) sequestration from herbal extracts.

The ubiquitous heavy metal(loid)s (HMs) contamination has triggered great concern about food safety, while sequestration and separation of trace HMs from herbal extracts still calls for appropriate sorbent materials. In this work, gum acacia was modified by cysteine to form a cysteine-acacia intermolecular complex (Cys-GA complex) via facile mechanochemical synthesis, aiming at capturing multiple HMs simultaneously. Preliminary screening confirms the superiority of Cys-CA complex for both cationic and anionic HMs, and determines an optimum Cys/GA mass ratio of 9:1 to achieve high removal capacities for Pb(II) (938 mg g-1), Cd(II) (834 mg g-1), As(V) (496 mg g-1), and Cr(VI) (647 mg g-1) in simulated aqueous solution. The analysis on HMs-exhausted Cys-GA complex indicates that Pb(II), As(V), and Cr(VI) tend to be removed through chelation, electrostatic attraction, and reduction, while Cd(II) can only be chelated or adsorbed by electrostatic interaction. The batch experiments on commercial herbal (e.g. Panax ginseng, Glycine max, Sophora flavescens, Gardenia jasminoides, Cyclocarya paliurus, and Bamboo leaf) extracts indicate that Cys-GA complex can reduce HMs concentration to attain acceptable level that comply with International Organization for Standardization, with negligible negative effect on its active ingredients. This work provides a practical and convenient strategy to purify HMs-contaminated foods without introducing secondary pollution.

Universal response method for the quantitative analysis of photodegradation impurities in lomefloxacin hydrochloride ear drops by liquid chromatography coupled with charged aerosol detector.

In terms of risk assessment especially for the impurities with different ultraviolet responses, quantitative analysis without the availability of corresponding reference substances currently poses a challenge. In this study, a universal response method was established for the quantitative analysis of photodegradable impurities in lomefloxacin hydrochloride ear drops by high performance liquid chromatography-charged aerosol detector (HPLC-CAD) for the first time. The chromatographic conditions and CAD parameters were optimized for a good separation and sensitivity. The uniform response of developed method was validated by impurity reference substances with different ultraviolet responses. In the gradient compensation HPLC-CAD method validation, good linearities were obtained with coefficient of determination (R2) all greater than 0.999 for lomefloxacin and impurity reference substances. The average recoveries of the impurities were 98.63%- 102.18% by UV and 97.92%- 102.57% by CAD, respectively. RSDs all were less than 2.5% for intra-day and inter-day precision by UV and CAD, with good precision and accuracy. The correction factor experimental results showed that the developed method provided a uniform response to the impurities with differences chromophores in lomefloxacin. The effects of packaging materials and excipients on the photodegradation were also investigated using the developed method. The results of correlation analysis showed that the packaging materials with low light transmittance and the organic excipients (glycerol and ethanol) could significantly improve the stability of lomefloxacin hydrochloride ear drops. The developed HPLC-CAD quantification method was a reliable and universal response method for quantitative analysis of impurities in the lomefloxacin. This study also revealed the key factors affecting the photodegradation of lomefloxacin hydrochloride ear drops, which guided enterprises to improve drug prescription and packaging materials and ensure the public medication safety.

NMR-Based Metabolomics to Analyze the Effects of a Series of Monoamine Oxidases-B Inhibitors on U251 Cells.

Alzheimer's disease (AD) is a typical progressive neurodegenerative disorder, and with multiple possible pathogenesis. Among them, coumarin derivatives could be used as potential drugs as monoamine oxidase-B (MAO-B) inhibitors. Our lab has designed and synthesized coumarin derivatives based on MAO-B. In this study, we used nuclear magnetic resonance (NMR)-based metabolomics to accelerate the pharmacodynamic evaluation of candidate drugs for coumarin derivative research and development. We detailed alterations in the metabolic profiles of nerve cells with various coumarin derivatives. In total, we identified 58 metabolites and calculated their relative concentrations in U251 cells. In the meantime, the outcomes of multivariate statistical analysis showed that when twelve coumarin compounds were treated with U251cells, the metabolic phenotypes were distinct. In the treatment of different coumarin derivatives, there several metabolic pathways changed, including aminoacyl-tRNA biosynthesis, D-glutamine and D-glutamate metabolism, glycine, serine and threonine metabolism, taurine and hypotaurine metabolism, arginine biosynthesis, alanine, aspartate and glutamate metabolism, phenylalanine, tyrosine and tryptophan biosynthesis, glutathione metabolism and valine, leucine and isoleucine biosynthesis. Our work documented how our coumarin derivatives affected the metabolic phenotype of nerve cells in vitro. We believe that these NMR-based metabolomics might accelerate the process of drug research in vitro and in vivo.

Study on the impurity profile and influencing factors of photodegradation in non-aqueous ofloxacin ear drops using liquid chromatography combined with ion trap/time-of-flight mass spectrometry.

Ofloxacin ear drops contain a large proportion of organic solvents, which have a great effect on the photodegradation of ofloxacin. The photodegradation impurities of ofloxacin in aqueous solution has been studied, however, the photodegradation of ofloxacin in non-aqueous solution with a high proportion of organic solvents has not been reported. In this article, the impurity profile in non-aqueous ofloxacin ear drops was studied for further improvement of official monograph in pharmacopoeia and quality control of drug. The liquid chromatography combined with ion trap/time-of-flight mass spectrometry was applied to separate and characterize the structures of the impurities in non-aqueous ofloxacin ear drops. Mass fragmentation pattern of ofloxacin and its impurities were studied. The structures of seventeen impurities in ofloxacin ear drops were elucidated based on the high-resolution MSn data in positive ion modes, and ten of them were unknown impurities. The results showed that the impurity profile of non-aqueous ofloxacin solution was significantly different from that of aqueous ofloxacin solution. The effects of packaging materials and excipients on the photodegradation of ofloxacin ear drops were also investigated. The results of correlation analysis showed that the packaging materials with low light transmittance could reduce the light degradation, and ethanol of excipients could significantly decrease the light stability of ofloxacin ear drops. This study revealed the impurity profile and key factors affecting the photodegradation of non-aqueous ofloxacin ear drops, and guided enterprises to improve drug prescription and packaging materials to ensure the safety of drug use by the public.

C-4 Regioselective Alkylation of Pyridines Driven by Mechanochemically Activated Magnesium Metal.

Mechanochemically activated magnesium(0) metal as a highly active mediator driving direct C-4-H alkylation of pyridines with alkyl halides has been developed. Excellent regioselectivity and substrate scope, including those containing reducible functionalities, free amines, and alcohols, as well as biologically relevant molecules were achieved to access 4-alkylpyridine products. Preliminary mechanistic studies suggested a radical-radical coupling pathway.

An Efficient Continuous Flow Synthesis for the Preparation of N-Arylhydroxylamines: Via a DMAP-Mediated Hydrogenation Process.

The selective hydrogenation of nitroarenes to N-arylhydroxylamines is an important synthetic process in the chemical industry. It is commonly accomplished by using heterogeneous catalytic systems that contain inhibitors, such as DMSO. Herein, DMAP has been identified as a unique additive for increasing hydrogenation activity and product selectivity (up to >99%) under mild conditions in the Pt/C-catalyzed process. Continuous-flow technology has been explored as an efficient approach toward achieving the selective hydrogenation of nitroarenes to N-arylhydroxylamines. The present flow protocol was applied for a vast substrate scope and was found to be compatible with a wide range of functional groups, such as electron-donating groups, carbonyl, and various halogens. Further studies were attempted to show that the improvement in the catalytic activity and selectivity benefited from the dual functions of DMAP; namely, the heterolytic H2 cleavage and competitive adsorption.

Improving the Treatment Effect of Carotenoids on Alzheimer's Disease through Various Nano-Delivery Systems.

Natural bioactive compounds have recently emerged as a current strategy for Alzheimer's disease treatment. Carotenoids, including astaxanthin, lycopene, lutein, fucoxanthin, crocin and others are natural pigments and antioxidants, and can be used to treat a variety of diseases, including Alzheimer's disease. However, carotenoids, as oil-soluble substances with additional unsaturated groups, suffer from low solubility, poor stability and poor bioavailability. Therefore, the preparation of various nano-drug delivery systems from carotenoids is a current measure to achieve efficient application of carotenoids. Different carotenoid delivery systems can improve the solubility, stability, permeability and bioavailability of carotenoids to a certain extent to achieve Alzheimer's disease efficacy. This review summarizes recent data on different carotenoid nano-drug delivery systems for the treatment of Alzheimer's disease, including polymer, lipid, inorganic and hybrid nano-drug delivery systems. These drug delivery systems have been shown to have a beneficial therapeutic effect on Alzheimer's disease to a certain extent.

Study on Absorption, Distribution and Excretion of a New Candidate Compound XYY-CP1106 against Alzheimer's Disease in Rats by LC-MS/MS.

XYY-CP1106, a candidate compound synthesized from a hybrid of hydroxypyridinone and coumarin, has been shown to be remarkably effective in treating Alzheimer's disease. A simple, rapid and accurate high-performance liquid chromatography coupled with the triple quadrupole mass spectrometer (LC-MS/MS) method was established in this study to elucidate the pharmacokinetics of XYY-CP1106 after oral and intravenous administration in rats. XYY-CP1106 was shown to be rapidly absorbed into the blood (Tmax, 0.57-0.93 h) and then eliminated slowly (T1/2, 8.26-10.06 h). Oral bioavailability of XYY-CP1106 was (10.70 ± 1.72)%. XYY-CP1106 could pass through the blood-brain barrier with a high content of (500.52 ± 260.12) ng/g at 2 h in brain tissue. The excretion results showed that XYY-CP1106 was mainly excreted through feces, with an average total excretion rate of (31.14 ± 0.05)% in 72 h. In conclusion, the absorption, distribution and excretion of XYY-CP1106 in rats provided a theoretical basis for subsequent preclinical studies.

Metal-free regioselective mono- and poly-halogenation of 2-substituted indazoles.

An unprecedented metal-free regioselective halogenation of 2H-indazoles has been revealed, which not only realized the highly selective synthesis of mono-halogenated products, but also completed poly-halogenations by fine tuning the reaction conditions. Various mono-/poly-/hetero-halogenated indazoles were obtained in moderate to excellent yields. Notably, this approach features environmentally friendly solvents, mild reaction conditions, simple execution and short reaction time.

Determination of elemental impurities in lomefloxacin hydrochloride ear drops by inductively coupled plasma-mass spectrometry using oxygen reaction mode and study of their catalytic effect on photodegradation reaction.

RATIONALE: This study developed a method for the simultaneous determination of 12 element impurities in lomefloxacin hydrochloride ear drops using inductively coupled plasma-mass spectrometry (ICP-MS) in accordance with the requirements of the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use Q3D. However, this product contains high concentrations of organic compounds such as glycerol and ethanol, and soluble carbon interference exists when it is determined by direct injection method. Therefore, we applied ICP-MS using oxygen reaction mode to reduce the effect of high organic matter on plasma body. The catalytic effect of trace metal ions on the photodegradation of lomefloxacin hydrochloride was also investigated. METHODS: The sample was dissolved, diluted, and directly determined by direct injection using oxygen reaction mode of ICP-MS with 45 Sc, 73 Ge, and 115 In as internal standards. Direct injection using oxygen reaction mode was equipped with argon-oxygen mixer. To investigate the catalytic effect of metal ions on photodegradation, a series of combinations of lomefloxacin hydrochloride mixed with different metal ions were designed. After being irradiated under ultraviolet light for 10 days, the photodegraded impurities in combinations were determined using high-performance liquid chromatography. RESULTS: The linear relationships in the corresponding concentration range for 12 element impurities were good (r > 0.9993). Limits of detection were between 0.002 and 1.294 ng ml-1 . The average recoveries were 93.7%-108.2%, and the precision relative standard deviation was 0.04%-0.55% (n = 6). The experimental results showed that metal ions had a certain catalytic effect on photodegradation of lomefloxacin when EDTA, Mg2+ , and Cu2+ coexisted. CONCLUSIONS: ICP-MS using oxygen reaction mode is suitable for the direct determination of the sample rich in organic matter without digestion and can effectively eliminate the interference of high organic matter in this product. The established method was rapid, sensitive, and accurate and can be used for the quality control of elemental impurities in lomefloxacin hydrochloride ear drops.

Differentiation of tetracyclines and their 4-epimers by mass spectrometry of the alkali metal adduct ions.

Tetracyclines (TCs) are a family of broad-spectrum antibiotics. During the manufacturing process or storage, epimerization of tetracyclines could occur, leading to 4-epimers which are nearly inactive. From an analytical point of view, isomers are often difficult to distinguish. Previously, four pairs of TCs (oxytetracycline, tetracycline, doxycycline, chlortetracycline and their respective 4-epimers) were differentiated by mass spectrometry (MS) through protonated ions. However, they do not follow common rules and so it is still quite difficult to differentiate between them. In order to solve this, the four pairs were differentiated in the current study by collision induced dissociation (CID) spectra of the alkali adduct ions, including lithium, sodium and potassium. In the spectra of the sodium adducts, all studied tetracyclines showed a tendency to form [M+Na-NH3]+ ions, while the 4-epimers liked to form [M+Na-NH3-H2O]+ ions. Meanwhile, energy resolved mass spectrometry (ERMS) showed that all four 4-epimers' sodium adducts had the tendency to fragment at higher energy points. In the CID spectra of lithium adducts of TCs, a similar trend was observed for three pairs, except for doxycycline. For potassium adducts, the fragmentation was found to be less discriminative. As was derived from the 3D model, the four pairs all interact with the alkali metal through the dimethyl amino group at the C-4 position. The lithium adduct species also bound through the hydroxyl group at the C-5 position. If the TCs did not have a hydroxyl group at the C-5 position, they bound with the hydroxyl group at the C-6 position. For the same TC, with an increase of the diameter of the metal ion, the loss of H2O decreased gradually. As sodium adduct ions are common during the ionization process, TCs and their 4-epimers could be differentiated rapidly by ERMS of the sodium adduct ions.

Efficacy and safety of native type II collagen in modulating knee osteoarthritis symptoms: a randomised, double-blind, placebo-controlled trial.

PURPOSE: Knee osteoarthritis (OA) is the most common form of clinical arthritis in middle-aged and older individuals. Undenatured or native type II (TII) collagen derived from the chicken sternum has a good therapeutic effect on relieving severe pain of OA. Hence, the present study aimed to investigate the efficacy and safety of TII collagen (Native CT-II®) in individuals with knee OA. METHODS: We conducted a 12-week randomised, double-blind, placebo-controlled, parallel-group study on 101 participants aged 40-65 years with knee OA. The participants were randomised to receive either TII collagen, glucosamine hydrochloride + chondroitin sulfate (G + C) or a placebo. The primary outcome was an improvement in the joint health of the participants assessed using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) compared to G + C and placebo. RESULTS: Compared with the placebo group (n = 27), the TII collagen group (n = 29) and G + C group (n = 29) significantly improved the overall joint health measured by the change in WOMAC total score (week 12: TII collagen = -32.47 ± 19.51 and G + C = -33.74 ± 24.64 vs. placebo = -13.84 ± 17.61; p < 0.05) and relieved knee joint pain (week 12: TII collagen = -5.69 ± 3.66 and G + C = -6.03 ± 4.72 vs. placebo = -2.71 ± 3.95; p < 0.05). The statistically significant effect was observed as early as 4 weeks after the investigational product administration. Additionally, the TII collagen was more effective in improving the quality of life than the G + C. CONCLUSION: TII collagen not only has a significantly better effect and high safety profile for OA but also improves the quality of life of patients. LEVEL OF EVIDENCE: Level 1 - Randomized Controlled Trial. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT04470336 ; First submitted date: July 08, 2020; First posted date: July 14, 2020.

Design and biological features of platinum (II) complexes with 3-hydroxy-3-(Trifluoromethyl)cyclobutane-1,1-Dicarboxylate as a leaving ligand.

A series of platinum compounds 2a-5a and 2b-5b with fluoro-functional groups are designed and synthesized. Among them, complex 2b is the most effective agent with 3-hydroxy-3-(trifluoromethyl)cyclobutane-1,1-dicarboxylate as a leaving ligand, which showed better cytotoxic activity than compounds containing only CF3 or OH group at 3-position of cyclobutane-1,1-dicarboxylate. The water solubility of 2a is better than that of carboplatin (32 mg/mL vs. 16 mg/mL), and its antitumor activity on A549 is 4.6-fold higher than that of carboplatin. The IC50 value of 2b on A549 cells is 4.73 ± 0.64 µM, which is comparable to that of oxaliplatin and higher than that of carboplatin. Meanwhile, 2a and 2b are less toxic than oxaliplatin and cisplatin toward BEAS-2B cells. Moreover, 2a and 2b induce cell apoptosis in vitro by the Bax-Bcl-2-caspase-3 pathway and ferroptosis through inhibiting GPx-4 and elevating COX2. Results from in vivo experiment show that the inhibition rate of A549 xenograft tumor is cisplatin > 2b > oxaliplatin > 2a > carboplatin.

Modular reconstruction and optimization of the trans-4-hydroxy-L-proline synthesis pathway in Escherichia coli.

BACKGROUND: In recent years, there has been a growing demand for microbial production of trans-4-hydroxy-L-proline (t4Hyp), which is a value-added amino acid and has been widely used in the fields of medicine, food, and cosmetics. In this study, a multivariate modular metabolic engineering approach was used to remove the bottleneck in the synthesis pathway of t4Hyp. RESULTS: Escherichia coli t4Hyp synthesis was performed using two modules: a α-ketoglutarate (α-KG) synthesis module (K module) and L-proline synthesis with hydroxylation module (H module). First, α-KG attrition was reduced, and then, L-proline consumption was inhibited. Subsequently, to improve the contribution to proline synthesis with hydroxylation, optimization of gene overexpression, promotor, copy number, and the fusion system was performed. Finally, optimization of the H and K modules was performed in combination to balance metabolic flow. Using the final module H1K4 in a shaking flask culture, 8.80 g/L t4Hyp was produced, which was threefold higher than that produced by the W0 strain. CONCLUSIONS: These strategies demonstrate that a microbial cell factory can be systematically optimized by modular engineering for efficient production of t4Hyp.